Metal lantern housings with glass panels on an exterior wall

Empty housing or glass and LED: what to order from the Aligarh works

Dealers ask two things on WhatsApp. The code is covered in the first 12 SKUs note. This page is the other question: empty housing, or a complete fitting with glass and LED. Padma ships both, as specified. This page is only about that choice: when an empty body makes sense, when a ready head does, and what to write on a trade order for cast aluminium housing wholesale from Aligarh. For the wider picture of ordering direct from the works, see buy from the Aligarh works. We don't publish an IP rating, so we won't invent one.

When the counter wants an empty body

Empty means a die-cast aluminium housing, in the powder coat or antique wipe you confirmed, packed without glass and without LED. The body comes from the Aligarh works, and the glazing and lamp are done at your counter, by your electrician or on site.

It is the stronger choice when:

  • Your shop already stocks glass and B22 or LED modules locally and you want to control the look.
  • The project electrician will fit the glass on site and you are only supplying the metal head.
  • You want to stock cast bodies of the popular codes first and add glass in a later lot. Lock the codes first so the finish batch stays the same (see the dealer stocking map).

Write "empty", "housing only" or "empty body" on the line. If the quote says nothing, the packing team may assume glass and LED.

When the shelf needs glass and LED fitted

Complete means the quote specifies glass and LED: a ready head that looks right on a shelf or goes up quickly on site. A bulb is included only when the quote says so explicitly, so assume the bulb is separate unless it is written.

Order the complete fitting when:

  • A retail or showroom shelf needs a head that is ready to plug in and show.
  • The job is a society or builder handover and the client will not arrange glass separately.
  • An architect or contractor has asked for a complete lantern on the drawing. Settle the empty or glass and LED line first (see the architect spec sheet).

If a consultant wants an honest line on body and finish, ask on WhatsApp. There is no lab rating on the site to quote.

The two options side by side

Empty housing

  • Cast body and finish as quoted
  • Glass and LED supplied by you
  • For local glazing or fitting on site
  • Write "empty" or "housing only" on the quote

Glass and LED

  • Ready head as quoted
  • For shelves and project handovers
  • Bulb only if written
  • Write "glass and LED" on the quote

The same catalogue codes (about 201 models across gate, wall, hanging and pole lights) can be ordered either way. The difference is the specification, not the model family. Browse the catalogue or download the PDF to shortlist codes first.

Terms that apply either way

These figures are already published on the site, and nothing here is new:

  • Trade lots start at 10 pieces. One to five pieces are sold at retail list with no trade discount.
  • Payment is 50% advance on a confirmed order, with the balance before dispatch.
  • Billing is in INR, ex-works Aligarh, with freight extra. Works address and terms are on the About page.
  • Timing follows workshop time, described on the About page. A new mould still needs your sample and a fifty-piece run, so try a listed size first.
  • Freight is by weight or volume, by domestic courier from Aligarh 202001, and confirmed after the exact measure. See shipping.
  • Warranty covers manufacturing defects for 12 months. Padma sends a replacement part, not a cash refund. Send transit damage photos quickly (see returns).

Empty and glass and LED cartons pack differently, because glass is the fragile line. Stating the configuration on the quote matters for both packing and the freight estimate. A mixed lot, with some heads empty and some complete, is possible if you write the type on every line.

On WhatsApp at +91 70176 62533, name the codes from the catalogue PDF and write empty or glass and LED on every line, so a mixed carton is a decision and not a guess. Add the finish, quantity and city. If the pillar seat is the real doubt, measure it first with the cap guide and then choose the configuration. Our reply states the body, the holder and the size we will pack, and it does not include an ingress rating. Bank details for a confirmed order are on the About page.